Automotive

coal-1626368__340One of the most common sources of energy today is coal mining. Power stations and coal mines have been in the power industry for so long and they have proven to be very useful and advantageous in so many ways. However, there are also a number of disadvantages that these coal mines and power plants bring. And so, closure is mostly recommended. Below are some of the most common effects of coal mining closure.

  • Carbon dioxide is reduced. The emission of carbon dioxide is one of the disadvantages of having coal mines. People living near the area will surely experience its effect on their health. This is one of the main reasons why coal mines today are bound to be closed for good.
  • Unemployment level in the area will increase. This is one drawback that will greatly affect those who are relying on the jobs they have in most coal mines. Coal mines and power plants are a huge help in the livelihood of the locals and the closure will mean no job for them and no source of living for each family.

These are two of the main effects of coal mining closure. These two have been the major factors that experts consider when discussing the issue of coal mining closure.

Trivia Info Resource: www.lvnews.net.au

Advertisements

Fascinating Facts About Car Tyres

12106698_493139374189147_1126767452978919816_nCar owners know that they must replace their car tyres on a regular basis as well as perform different tyre maintenance to extend its life. But there are other important things they may not know.

Several Things You Did Not Know About Tyres

Like humans, tyres do age – Though checking your tyres is the best way for you to know if the car type pressure is what it should be, you need also to pay attention to your tyre’s age. Ozone, heat and sunlight can deteriorate your tyres and can lead to tyre failure. Check also your spare tyre for signs of damage. It is highly advised that you get a reputable advice from an expert.

Valve maintenance is very important – Valves will help maintain pressure in the tyre and must be replaced if new tyres are fitted. Valve caps, on the other hand, will protect the valve from the grit, dust and water.

Naturally, car tyres are white – But why car tyres are black? The colour change is due to the by-product of adding carbon to the rubber. The rubber was then replaced by silica for most tyres as this material can enhance the grip in the wet. Still, the colour remained black. Silica can also withstand dirt and can complement any car colour.

Crumbing – What Is It?

This is a technique that is used to turn old tyres into fine powder, larger rubber particles, or granules, which are being used to create roads. Most construction companies used these materials because it costs less and is a lot easier to transport as compared to crushed rock. If used for resurfacing roads, it can increase emissions. Moreover, it can extend the life of roads.

Trivia Info Resource: autohaus.ae

Armoured Vehicle Facts That You May Not Know About

armoured vehicleIn the last 20 years, the armoured car industry has increasingly developed and has saved countless lives for people who are receiving its protection. Protections that they might not have while traveling in their vehicles. From original slow moving tanks, and luxury bullet resistance vehicles to agile and powerful armoured vehicles such as AJBAN ISV, this development has offered people a new level of protection providing owners a peace of mind.

Here are some facts about our reliable armored vehicles you may want to know:

  • Armored cars are capable of running even with deflated tires. A flat tire can’t slow down an excellent armoured truck because of the run-flat tires that are pneumatic tires that are designed to resist the usual effects of deflation.
  • An armoured truck can carry up to 55,000 pounds of weight. That’s 27 tons of cash! Provided that these trucks are driven by a skilled driver and adding some layers of security features, armoured trucks as much as most would say the favorite target of rubbers, wouldn’t be an easy prey.
  • The original design of the earliest armoured trucks came from Chicago police force from the 20s. And these trucks are actually school busses fitted with plating to help protect them from arms fire.

Trivia Info Resource: http://nimr.ae

How Important Is An Oil Cooler Upgrade To A Motorcycle?

Timely maintenance of motorcycles is a very important thing for many motorcycle enthusiasts. A lot of motorcycle owners make the mistake of thinking that the engines overheat simply because of the ambient air temperature. Many think that an air-cooled engine will suffice in keeping the engine cool.

02

The truth is that these are not necessarily true. On one hand, you have to consider in the poor quality of fuel currently available in the market today. Additionally, your ride may need an air cooler upgrade. There are numerous benefits when you upgrade your air cooler. As a matter of fact, it cools oil by using a heat exchanger strategically placed behind the fans. It facilitates the flow of the oil through its fins even when the fans are not activated. Now, when the temperature of the oil breaches the 220 degree Fahrenheit mark, the fans will activate to blow air through it.

The fans will continue to blow air until the oil temperature is lowered to 190 degrees. The oil cooler will continue to work whether your motorcycle is moving or not, ensuring that the oil maintains a stable temperature. It does not add unnecessary noise as well. The fans of the oil cooler are quiet.

In addition, you will not feel the air blasting from the fans because the air moves under the bike. Essentially, you will not even know that the oil cooler is there unless you look at its LED indicator which can be mounted practically anywhere you like to. Apart from cooling the oil and keeping the temperature of the motor at an acceptable level, an oil cooler offers additional benefits, including reduced ping and knock in the engine which translates to improved performance. This is also one of the reasons why many motorcycle owners invest in this upgrade.

Trivia Info Resource: http://www.ultracoolfl.com/

Bobcat Tires and Tracks Operators Should Know

Bobcat Hire In Perth

Bobcat tire and tracks are designed to add grip and traction for carrying heavy loads. Operators must know that in order to maintain proper weight distribution and to ensure that all jobs are done efficiently, it is essential to choose the right tires for the machine.

Tires
Consider the weight of your load when choosing tires. Always keep it balanced. Wash of dirt and remove embedded rocks after use.

  • Pneumatic Loader Tires – opt for these tires your job demands an aggressive tire. Whether it is for construction, rental, recycling, mining, industrial, and other severe applications, the severe duty type performs well. The heavy duty type is a good option if you want to increase your protection against cracks and punctures.
  • Solid Tires – these tires are made from enhanced rubber mining compound that are ultra tough. Solid tires are 2 times stronger than pneumatic tires thus eliminating downtime due to flat tires.

Rubber Track
With steel embeds or links, internal steel cables, and cut resistant and anti-gouge rubber compounds, bobcat rubber track are designed to match its needs. These are usually made from natural and synthetic rubbers to maximize wear. Your options are as follows:

  • Compact Track Loader Rubber Tracks
  • Mini Track Loader Rubber Tracks
  • Compact Excavator Rubber Tracks

Trivia Info Resource: www.contractorsgroup.com.au

Top 10 Most Expensive Cars In 2014

car finance finestreamDid you know that in 2014, Lamborghini Veneno Roadster tops the list of the most expensive cars with a starting price of $4.5 million? The maker of this car which originates from Italy has built only nine copies.

Next to Lamborghini Veneno Roadster are these cars:

Bugatti Veyron 16.4 Grand Sport Vitesse – France is the country of origin of this $2.5 million car. Since its introduction in 2005 up, Bugatti says that in December 2013, they have already sold 400 Veyrons worldwide.

Koenigsegg Agera S – the starting price for this model is $1,520,000. Originating from Sweden, the first Agera S was shipped to the United States in 2013.

Hennessey Venom GT – setting a Guinness World Book-record time of 13.63 seconds from zero to 300 kph, this car from United Kingdom is priced at $1.2 million. Hennessey plans to build a total of only 29 cars for this model.

Porsche 918 Spyder – this Germany car has a tag of $845,000 as its starting price. This car features the hybrid gasoline-electric powertrain.

Rolls-Royce Phantom Extended Wheelbase – another car from the United Kingdom with a starting price of $298,900.

Ferrari F12berlinetta – the country of origin is Italy. At $315,888, this model it has the fastest acceleration of any road-going Ferrari.

Bentley Mulsanne – called the grandest of grand tourers. The starting price of this car is $298,900. Considering it weighs close to 6,000 pounds, the performance of this car from UK is pretty amazing.

Aston Martin Vanquish – a two-door hardtop coupe from the UK and sold at a starting price of $279,995. The brand image of Aston Martin is caught up with classic James Bond movies.

Mercedes-Benz CL65 AMG Coupe – originating from Germany with a price of $215,500.

Trivia Info Resource: finestream.com.au

Hino Motors: Creating Cars, Not Only Trucks

HinoHino Motors is known to be one of the most renowned manufacturers of mid-size and heavy trucks. Hino, as of today, is under the Toyota Motor Corporation which continues to create reliable and sturdy trucks for any type of business. But, other than trucks, Hino Motors also manufactured several cars. Listed below are the following.

Hino Renault 4CV

Renault is one of the big guns in the automotive industry. Renault has created some of the best car models like the Renault 4CV. The Renault 4CV has been popular all over the world and Renault looked for a partner in other countries that can assemble the 4CV. Hino Motors is one of their partners. During 1953-1961 in Japan, the Renault 4CV was rebadged to Hino Renault 4CV.

Hino Contessa

After working with Renault, Hino Motors also signed a contract with Kaiser-Illin Industries for 10 years. Hino Motors in this contract has manufactured the Hino Contessa. Other manufactured cars in this contract are Briska 900 and 1300 and the Contessa 1300 sedan.

Toyota FJ Cruiser

Toyota Motor Corporation purchased Hino. With this, it opened a new opportunity for Hino to build cars once again. This time, it is not a sedan but an SUV with the underpinnings from the Toyota Land Cruiser Prado, The Toyota FJ Cruiser. Hino has started manufacturing Toyota FJ Cruiser since 2006.

Info Source From: www.hino.ae

Major Parts Of A Forklift

ToyotaForkliftSome of the most common uses of a forklift are lifting, transporting and delivering. Forklifts can accomplish all these tasks due to its amazing and functional parts. Listed below are the major parts of a forklift that help individuals finish their tasks easily and safely.

Counterweight

This is a heavy cast iron mass attached to the rear of the forklift truck frame. Counterweight is installed in forklifts to prevent the machine from tipping over. In electric forklifts, the lead-acid battery is used as the counterweight.

Tilt cylinders

These hydraulic cylinders are mounted to the truck frame and mast. It allows the forklift to pivot the mast.

Mast

This is the vertical assembly that allows forklifts in raising and lowering the load. The mast is made up of interlocking rails. The interlocking rails may consist of rollers or bushings as guides. The mast is powered by one or more hydraulic cylinders that are installed directly or with the use of chains from the cylinders.

Load back rest

This is a rack-like extension that is mounted to the carriage. This part prevents the load from shifting backwards when lifted at full height.

Attachments

Attachments consist of forks or tines that are L-shaped. Some attachments include sideshifters, slipsheet attachments, carton clamps, multipurpose clamps, rotators and fork positioners.

Info source from: www.toyotaforklift.ae

Types Of Motorcycles

BikelogisticsWhen talking about motorcycles, individuals frequently think of a two-wheeled vehicle. With the improving technology and innovations, three and even four-wheeled motorbikes are created. To know more about motorcycles, listed below are the most common types of motorcycles.

Street bikes

These two-wheelers are the most common bikes that are seen travelling on the road.

•    Cruisers – These bikes were created from the 1930s up to the early 1960s. Some of the famous cruiser bike brands are Harley-Davidson, Indian, and Excelsior-Henderson. These bikes commonly have large-displacement V-twin engines.
•    Sport bike – When talking about sport bikes, all you can think about is speed, acceleration, braking and cornering. These bikes have fairings. These are coverings enclosing the engine.
•    Scooters – Scooters are small bikes with small engines typically ranging from 50–850 cc. Scooters also have Automatic clutches and continuously variable transmissions (CVT), which means that they are easier to drive.
•    Mopeds – Mopeds are a hybrid of a bike and a motorcycle. Mopeds commonly have a small two-stroke engine. As of now, mopeds also use electric engines.
•    Underbones – This is a small-displacement motorcycle with a step-through frame. Underbones differ from scooters due to its bigger wheel diameter and the use of footpegs rather than floorboards.

Off-road motorcycles

There are also motorcycles that are created specifically for off-road use. Some varieties of off-road bikes are:

•    Motocross – These motorcycles have small fuel tank for lightness, compactness and long-travel suspension.
•    Enduro – These off-road bikes are also road-legal since they come with a horn, lights, effective silencing and a number plate.
•    ATVs – ATV or All-Terrain Vehicles have three or four wheels. This type of motorbike is designed to handle a wider variety of terrain.

Info Source From: www.bikelogistics.com.au

The Evolution Of Nissan Motor Co.

Nissan CarNissan Motor Co. is actually known by many names. This major Asian conglomerate has indeed been making high quality cars since 1914. Nowadays, it is considered the 3rd largest automaker in Japan.

Brief History Of Nissan Motor Co.

Nissan’s history goes back to an automobile factory, Kwaishinsha Co., which was started by Masujiro Hashimoto in 1911. Hashimoto was actually known to be the pioneer in Japan’s automotive industry at its inception as well as throughout its initial years of struggle.

A box-type small passenger car was completed in 1914 – this was based on his own design. The following year, the car made its debut on the market under the name of “Dat Car”. You must know that Dat represents the first letters of the family names of the 3 principal backers of Hashimoto – Kenjiro Den, Rokuro Aoyama and Meitaro Takeuchi.

Another predecessor of Nissan Motor Co., Jitsuyo Jidosha Co., Ltd was established in 1919 in Osaka. It was in 1926 that Jitsuyo Jidosha Co., Ltd and Kwaishinsha Co. merged in to form Dat Jidosha Seizo Co. And in 1931, it became affiliated with Tobata Casting, a company that was founded earlier by Aikawa. Two years later, the Nissan Motor Co. was established.

In 1937, the Datsun Type 15 became the first ever mass-produced vehicle in Japan. In fact, it also comes in delivery van and mini-pickup form.

Trivia Info Resource: nissan-alissa.com